Dhruv EPC Solutions Pvt. Ltd.
CIN: U27100GJ2010PTC059491 Reg. Date: 09/02/2010

Project

Products with photographs
   
DE AERATOR FABRICATION IN PROGRESS :
 
   
Design by Engineers India Limited,
Inspection Dy. Director – ibr
Capacity 50 m3 / hr.,
Ndt 100 % radiography tested
Quantity 01 no.
Finished product weight 15367.00 kg.
Design pressure & temperature 3.50 kg / cm2, at 175 oc.
Design code The Indian Boiler Regulation and Asme Section viii div.1.
Dimensions 3000 id x 6500 t/t x 12 th
Storage tank part 2000 id x 2000 t /t x 12 th
Head tank part separation trays, baffles
Head tank internals sa 516 gr 70, bq
M.O.C. Shell perforated ss 316 |
   
SOFT WATER TANK DESPATCHING :
 
   
Design code IS 803.
N.D.T. Inspection 100 % radiography tested approved by - sgs
Capacity 70.0 m3
Dimension

4000 id x 5570 t/h x 10 th, flat bottom resting, 15o conical 

roof withrailing and cat ladder.

M.O.C. IS 2062 b
   
EXPANSION JOINTS : 2750 mm MS Slip Type Expansion Joints.
 
   
Inspection By Client and Mcgm
Quantity 40 numbers
Weight 5000 kgs.
Design / hydro test pressure 10 kg/cm2g / 15 kg/cm2g
Water supply project Mcgm : tansa pipeline - Chinchavali to Tarali section
Line size & moc 2750 mm – is 2062 e250 cu gr. A
   
AIR RECEIVERS :
 
   
Inspection atlas copco
Design varified Despl on pv elite confirm to asme section viii-div.1
Capacity 1.0 m3 x 7.00 kg /cm 2 and 3.0 m3 x 10.0 kg /cm2 ),
N.D.T. Inspection 10 %.
Design code is 2825
Dimension 760 od x 1600 h x 5 th and 1200 od x 2550 h x 8 mm
M.O.C. is 2062 b
   
FIXED TUBE SHEET DOUBLE PASS SAMPLE HEAT EXCHANGER
 
Type bem
Design code tema and asme section viii div.1.
M.O.C. Plate sa 240 gr 304
Tube sa 213 tp 304
   
H.S.D.TANK FABRICATED AND EPOXY SPRAY PAINTED
 
   
Capacity 900 |
Quantity 02 nos.
Design code is – 803
Dimension 1020 x 1020 x 1280 h , 10 mm th
M.O.C. is 2062 b
   
EXPERTISE WELDING JOB OF LARGE SIZE GEAR WHEEL DIS-SIMILAR MATERIAL
 
Inspection Client
N.D.T. dp, mpt and ut
Material of Construction Hub 590 od x 275 id x 415 width (cast steel, is - 1030 gr 280 - 520 w)
Gear rim 2020 od x 1702 id x 340 width, forged alloy steel – 20 mn cr 5
Central & rib plates cs is 2062 b
Job single piece weight 4779.00 kg
Caution

Maintained constant weld point temp. 3000c,using gas burners,

pre heat flux coated electodes